Gladiator aluminium foil tape is flexible and strong, and may be used on almost all surfaces. Ideal for quick repairs, UV resistant, waterproof and Class “O” Fire Retardant. Cold weather adhesive is formulated to work in temperatures of -35°C to +120°C.
This is a nominal 30 micron (1.2 mil) high tensile strength aluminium foil backing, combined with a cold weather solvent acrylic adhesive, protected by an easy-release silicone release paper.
Features of the Gladiator Aluminium Foil Tape:
- Class “O” Fire Retardant
- 72mm width x 45m length
- Aluminium backing provides excellent reflection of both heat and light
- Cold weather adhesive with high adhesion offers good sealing and bonding on Foil-Scrim-Kraft Facing joints and seams in HVAC ductwork application
- Good ageing resistance both indoors and outdoors
- Low moisture vapour transmission rate offers excellent sealing and patching performance
What Applications Can I Use the Foil Tape For?:
HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fibreglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. General purpose holding, patching, sealing and masking applications – indoors and outdoors.
Technical Properties:
- Backing Thickness: 30 Micron
- Total Thickness: 70 Micron
- Adhesion to Steel: 15 N/25mm
- Tack Rolling Ball: 5 cm
- Tensile Strength: 45 N/25mm
- Elongation: 3.0 %
- Service Temperature: -35°C to + 120°C
- Application Temperature: -20° to + 40°C
Storage & Shelf Life: 12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.
Surface Preparation: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
Reviews
There are no reviews yet.